一步一步学ZedBoard Zynq(四)：基于AXI Lite 总线的从设备IP设计

-- DO NOT EDIT BELOW THIS LINE ---------------------
-- Bus protocol ports, do not add to or delete
Bus2IP_Clk : in std_logic;
Bus2IP_Resetn : in std_logic;
Bus2IP_Data : in std_logic_vector(C_SLV_DWIDTH-1 downto 0);
Bus2IP_BE : in std_logic_vector(C_SLV_DWIDTH/8-1 downto 0);
Bus2IP_RdCE : in std_logic_vector(C_NUM_REG-1 downto 0);
Bus2IP_WrCE : in std_logic_vector(C_NUM_REG-1 downto 0);
IP2Bus_Data : out std_logic_vector(C_SLV_DWIDTH-1 downto 0);
IP2Bus_RdAck : out std_logic;
IP2Bus_WrAck : out std_logic;
IP2Bus_Error : out std_logic
-- DO NOT EDIT ABOVE THIS LINE ---------------------
);
end component user_logic;

begin

------------------------------------------
-- instantiate axi_lite_ipif
------------------------------------------
AXI_LITE_IPIF_I : entity axi_lite_ipif_v1_01_a.axi_lite_ipif
generic map
(
C_S_AXI_DATA_WIDTH => IPIF_SLV_DWIDTH,
C_S_AXI_ADDR_WIDTH => C_S_AXI_ADDR_WIDTH,
C_S_AXI_MIN_SIZE => C_S_AXI_MIN_SIZE,
C_USE_WSTRB => C_USE_WSTRB,
C_DPHASE_TIMEOUT => C_DPHASE_TIMEOUT,
C_ARD_ADDR_RANGE_ARRAY => IPIF_ARD_ADDR_RANGE_ARRAY,
C_ARD_NUM_CE_ARRAY => IPIF_ARD_NUM_CE_ARRAY,
C_FAMILY => C_FAMILY
)
port map
(
S_AXI_ACLK => S_AXI_ACLK,
S_AXI_ARESETN => S_AXI_ARESETN,
S_AXI_AWADDR => S_AXI_AWADDR,
S_AXI_AWVALID => S_AXI_AWVALID,
S_AXI_WDATA => S_AXI_WDATA,
S_AXI_WSTRB => S_AXI_WSTRB,
S_AXI_WVALID => S_AXI_WVALID,
S_AXI_BREADY => S_AXI_BREADY,
S_AXI_ARADDR => S_AXI_ARADDR,
S_AXI_ARVALID => S_AXI_ARVALID,
S_AXI_RREADY => S_AXI_RREADY,
S_AXI_ARREADY => S_AXI_ARREADY,
S_AXI_RDATA => S_AXI_RDATA,
S_AXI_RRESP => S_AXI_RRESP,
S_AXI_RVALID => S_AXI_RVALID,
S_AXI_WREADY => S_AXI_WREADY,
S_AXI_BRESP => S_AXI_BRESP,
S_AXI_BVALID => S_AXI_BVALID,
S_AXI_AWREADY => S_AXI_AWREADY,
Bus2IP_Clk => ipif_Bus2IP_Clk,
Bus2IP_Resetn => ipif_Bus2IP_Resetn,
Bus2IP_Addr => ipif_Bus2IP_Addr,
Bus2IP_RNW => ipif_Bus2IP_RNW,
Bus2IP_BE => ipif_Bus2IP_BE,
Bus2IP_CS => ipif_Bus2IP_CS,
Bus2IP_RdCE => ipif_Bus2IP_RdCE,
Bus2IP_WrCE => ipif_Bus2IP_WrCE,
Bus2IP_Data => ipif_Bus2IP_Data,
IP2Bus_WrAck => ipif_IP2Bus_WrAck,
IP2Bus_RdAck => ipif_IP2Bus_RdAck,
IP2Bus_Error => ipif_IP2Bus_Error,
IP2Bus_Data => ipif_IP2Bus_Data
);

------------------------------------------
-- instantiate User Logic
------------------------------------------
USER_LOGIC_I : component user_logic
generic map
(
-- MAP USER GENERICS BELOW THIS LINE ---------------
--USER generics mapped here
-- MAP USER GENERICS ABOVE THIS LINE ---------------

C_NUM_REG => USER_NUM_REG,
C_SLV_DWIDTH => USER_SLV_DWIDTH
)
port map
(
-- MAP USER PORTS BELOW THIS LINE ------------------
LED => LED,
-- MAP USER PORTS ABOVE THIS LINE ------------------

Bus2IP_Clk => ipif_Bus2IP_Clk,
Bus2IP_Resetn => ipif_Bus2IP_Resetn,
Bus2IP_Data => ipif_Bus2IP_Data,
Bus2IP_BE => ipif_Bus2IP_BE,
Bus2IP_RdCE => user_Bus2IP_RdCE,
Bus2IP_WrCE => user_Bus2IP_WrCE,
IP2Bus_Data => user_IP2Bus_Data,
IP2Bus_RdAck => user_IP2Bus_RdAck,
IP2Bus_WrAck => user_IP2Bus_WrAck,
IP2Bus_Error => user_IP2Bus_Error
);

------------------------------------------
-- connect internal signals
------------------------------------------
ipif_IP2Bus_Data <= user_IP2Bus_Data;
ipif_IP2Bus_WrAck <= user_IP2Bus_WrAck;
ipif_IP2Bus_RdAck <= user_IP2Bus_RdAck;
ipif_IP2Bus_Error <= user_IP2Bus_Error;

user_Bus2IP_RdCE <= ipif_Bus2IP_RdCE(USER_NUM_REG-1 downto 0);
user_Bus2IP_WrCE <= ipif_Bus2IP_WrCE(USER_NUM_REG-1 downto 0);