一步一步学ZedBoard Zynq(四)：基于AXI Lite 总线的从设备IP设计

attribute MAX_FANOUT : string;
attribute SIGIS : string;
attribute MAX_FANOUT of S_AXI_ACLK : signal is "10000";
attribute MAX_FANOUT of S_AXI_ARESETN : signal is "10000";
attribute SIGIS of S_AXI_ACLK : signal is "Clk";
attribute SIGIS of S_AXI_ARESETN : signal is "Rst";
end entity my_axi_ip;

------------------------------------------------------------------------------
-- Architecture section
------------------------------------------------------------------------------

architecture IMP of my_axi_ip is

constant USER_SLV_DWIDTH : integer := C_S_AXI_DATA_WIDTH;

constant IPIF_SLV_DWIDTH : integer := C_S_AXI_DATA_WIDTH;

constant ZERO_ADDR_PAD : std_logic_vector(0 to 31) := (others => '0');
constant USER_SLV_BASEADDR : std_logic_vector := C_BASEADDR;
constant USER_SLV_HIGHADDR : std_logic_vector := C_HIGHADDR;

constant IPIF_ARD_ADDR_RANGE_ARRAY : SLV64_ARRAY_TYPE :=
(
ZERO_ADDR_PAD & USER_SLV_BASEADDR, -- user logic slave space base address
ZERO_ADDR_PAD & USER_SLV_HIGHADDR -- user logic slave space high address
);

constant USER_SLV_NUM_REG : integer := 1;
constant USER_NUM_REG : integer := USER_SLV_NUM_REG;
constant TOTAL_IPIF_CE : integer := USER_NUM_REG;

constant IPIF_ARD_NUM_CE_ARRAY : INTEGER_ARRAY_TYPE :=
(
0 => (USER_SLV_NUM_REG) -- number of ce for user logic slave space
);

------------------------------------------
-- Index for CS/CE
------------------------------------------
constant USER_SLV_CS_INDEX : integer := 0;
constant USER_SLV_CE_INDEX : integer := calc_start_ce_index(IPIF_ARD_NUM_CE_ARRAY, USER_SLV_CS_INDEX);

constant USER_CE_INDEX : integer := USER_SLV_CE_INDEX;

------------------------------------------
-- IP Interconnect (IPIC) signal declarations
------------------------------------------
signal ipif_Bus2IP_Clk : std_logic;
signal ipif_Bus2IP_Resetn : std_logic;
signal ipif_Bus2IP_Addr : std_logic_vector(C_S_AXI_ADDR_WIDTH-1 downto 0);
signal ipif_Bus2IP_RNW : std_logic;
signal ipif_Bus2IP_BE : std_logic_vector(IPIF_SLV_DWIDTH/8-1 downto 0);
signal ipif_Bus2IP_CS : std_logic_vector((IPIF_ARD_ADDR_RANGE_ARRAY'LENGTH)/2-1 downto 0);
signal ipif_Bus2IP_RdCE : std_logic_vector(calc_num_ce(IPIF_ARD_NUM_CE_ARRAY)-1 downto 0);
signal ipif_Bus2IP_WrCE : std_logic_vector(calc_num_ce(IPIF_ARD_NUM_CE_ARRAY)-1 downto 0);
signal ipif_Bus2IP_Data : std_logic_vector(IPIF_SLV_DWIDTH-1 downto 0);
signal ipif_IP2Bus_WrAck : std_logic;
signal ipif_IP2Bus_RdAck : std_logic;
signal ipif_IP2Bus_Error : std_logic;
signal ipif_IP2Bus_Data : std_logic_vector(IPIF_SLV_DWIDTH-1 downto 0);
signal user_Bus2IP_RdCE : std_logic_vector(USER_NUM_REG-1 downto 0);
signal user_Bus2IP_WrCE : std_logic_vector(USER_NUM_REG-1 downto 0);
signal user_IP2Bus_Data : std_logic_vector(USER_SLV_DWIDTH-1 downto 0);
signal user_IP2Bus_RdAck : std_logic;
signal user_IP2Bus_WrAck : std_logic;
signal user_IP2Bus_Error : std_logic;

------------------------------------------
-- Component declaration for verilog user logic
------------------------------------------
component user_logic is
generic
(
-- ADD USER GENERICS BELOW THIS LINE ---------------
--USER generics added here
-- ADD USER GENERICS ABOVE THIS LINE ---------------

-- DO NOT EDIT BELOW THIS LINE ---------------------
-- Bus protocol parameters, do not add to or delete
C_NUM_REG : integer := 1;
C_SLV_DWIDTH : integer := 32
-- DO NOT EDIT ABOVE THIS LINE ---------------------
);
port
(
-- ADD USER PORTS BELOW THIS LINE ------------------
LED : out std_logic_vector(7 downto 0);
-- ADD USER PORTS ABOVE THIS LINE ------------------