一步一步学ZedBoard Zynq(四)：基于AXI Lite 总线的从设备IP设计

library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;

library proc_common_v3_00_a;
use proc_common_v3_00_a.proc_common_pkg.all;
use proc_common_v3_00_a.ipif_pkg.all;

library axi_lite_ipif_v1_01_a;
use axi_lite_ipif_v1_01_a.axi_lite_ipif;

------------------------------------------------------------------------------
-- Entity section
------------------------------------------------------------------------------
-- Definition of Generics:
-- C_S_AXI_DATA_WIDTH -- AXI4LITE slave: Data width
-- C_S_AXI_ADDR_WIDTH -- AXI4LITE slave: Address Width
-- C_S_AXI_MIN_SIZE -- AXI4LITE slave: Min Size
-- C_USE_WSTRB -- AXI4LITE slave: Write Strobe
-- C_DPHASE_TIMEOUT -- AXI4LITE slave: Data Phase Timeout
-- C_BASEADDR -- AXI4LITE slave: base address
-- C_HIGHADDR -- AXI4LITE slave: high address
-- C_FAMILY -- FPGA Family
-- C_NUM_REG -- Number of software accessible registers
-- C_NUM_MEM -- Number of address-ranges
-- C_SLV_AWIDTH -- Slave interface address bus width
-- C_SLV_DWIDTH -- Slave interface data bus width
--
-- Definition of Ports:
-- S_AXI_ACLK -- AXI4LITE slave: Clock
-- S_AXI_ARESETN -- AXI4LITE slave: Reset
-- S_AXI_AWADDR -- AXI4LITE slave: Write address
-- S_AXI_AWVALID -- AXI4LITE slave: Write address valid
-- S_AXI_WDATA -- AXI4LITE slave: Write data
-- S_AXI_WSTRB -- AXI4LITE slave: Write strobe
-- S_AXI_WVALID -- AXI4LITE slave: Write data valid
-- S_AXI_BREADY -- AXI4LITE slave: Response ready
-- S_AXI_ARADDR -- AXI4LITE slave: Read address
-- S_AXI_ARVALID -- AXI4LITE slave: Read address valid
-- S_AXI_RREADY -- AXI4LITE slave: Read data ready
-- S_AXI_ARREADY -- AXI4LITE slave: read addres ready
-- S_AXI_RDATA -- AXI4LITE slave: Read data
-- S_AXI_RRESP -- AXI4LITE slave: Read data response
-- S_AXI_RVALID -- AXI4LITE slave: Read data valid
-- S_AXI_WREADY -- AXI4LITE slave: Write data ready
-- S_AXI_BRESP -- AXI4LITE slave: Response
-- S_AXI_BVALID -- AXI4LITE slave: Resonse valid
-- S_AXI_AWREADY -- AXI4LITE slave: Wrte address ready
------------------------------------------------------------------------------

entity my_axi_ip is
generic
(
-- ADD USER GENERICS BELOW THIS LINE ---------------
--USER generics added here
-- ADD USER GENERICS ABOVE THIS LINE ---------------

-- DO NOT EDIT BELOW THIS LINE ---------------------
-- Bus protocol parameters, do not add to or delete
C_S_AXI_DATA_WIDTH : integer := 32;
C_S_AXI_ADDR_WIDTH : integer := 32;
C_S_AXI_MIN_SIZE : std_logic_vector := X"000001FF";
C_USE_WSTRB : integer := 0;
C_DPHASE_TIMEOUT : integer := 8;
C_BASEADDR : std_logic_vector := X"FFFFFFFF";
C_HIGHADDR : std_logic_vector := X"00000000";
C_FAMILY : string := "virtex6";
C_NUM_REG : integer := 1;
C_NUM_MEM : integer := 1;
C_SLV_AWIDTH : integer := 32;
C_SLV_DWIDTH : integer := 32
-- DO NOT EDIT ABOVE THIS LINE ---------------------
);
port
(
-- ADD USER PORTS BELOW THIS LINE ------------------
LED : out std_logic_vector(7 downto 0);
-- ADD USER PORTS ABOVE THIS LINE ------------------

-- DO NOT EDIT BELOW THIS LINE ---------------------
-- Bus protocol ports, do not add to or delete
S_AXI_ACLK : in std_logic;
S_AXI_ARESETN : in std_logic;
S_AXI_AWADDR : in std_logic_vector(C_S_AXI_ADDR_WIDTH-1 downto 0);
S_AXI_AWVALID : in std_logic;
S_AXI_WDATA : in std_logic_vector(C_S_AXI_DATA_WIDTH-1 downto 0);
S_AXI_WSTRB : in std_logic_vector((C_S_AXI_DATA_WIDTH/8)-1 downto 0);
S_AXI_WVALID : in std_logic;
S_AXI_BREADY : in std_logic;
S_AXI_ARADDR : in std_logic_vector(C_S_AXI_ADDR_WIDTH-1 downto 0);
S_AXI_ARVALID : in std_logic;
S_AXI_RREADY : in std_logic;
S_AXI_ARREADY : out std_logic;
S_AXI_RDATA : out std_logic_vector(C_S_AXI_DATA_WIDTH-1 downto 0);
S_AXI_RRESP : out std_logic_vector(1 downto 0);
S_AXI_RVALID : out std_logic;
S_AXI_WREADY : out std_logic;
S_AXI_BRESP : out std_logic_vector(1 downto 0);
S_AXI_BVALID : out std_logic;
S_AXI_AWREADY : out std_logic
-- DO NOT EDIT ABOVE THIS LINE ---------------------
);