Differential to single converter
时间：04-11
整理：3721RD
点击：
I tried to use single stage OTA to realize differential to single conversion. The block diagram is shown in Fig. 1 and the OTA schematic is shown in Fig. 2.
The Vo relates to the input signal is as
Vo = Vinp ? Vinn
In order the input impedance is the same, C2 is chosed to be 2*C1. However, I found the s11 (Fig. 3) is still different and the Vinp is still 2 dB higher than Vinn. The circuit is operated at 2.5GHz.
What is the reason?
The Vo relates to the input signal is as
Vo = Vinp ? Vinn
In order the input impedance is the same, C2 is chosed to be 2*C1. However, I found the s11 (Fig. 3) is still different and the Vinp is still 2 dB higher than Vinn. The circuit is operated at 2.5GHz.
What is the reason?
Differential single converter 相关文章：
- Loadpull for Differential PA
- How come differential cascode structures affect on PA characteristics?
- Microstrip differential impedance depending on line width
- Differential Input For Dickson Chgarge pump Rectifier
- Multiband Differential Rectifying Circuit (re symmetry or not)
- Differentially-Fed Rectifier