Need help for a project

时间：04-11 整理：3721RD 点击：

hi :D

I need some schematic or "how to build" a list of item below:

1.AM RF transmitter and receiver amplifier
2.AM RF transmitter and receiver changer or controller

I try to build rf transmitter

Code:

http://www.ee.washington.edu/circuit.../transmit.html

but it didn't work :(

The conclusion of this project is to build a portable Walkie-talkie using RF :D

PS: I don't know anything about E&E :(

Do you have any experience in RF/ electronic design?
This circuit should be very easy to construct since it seems to be a kit provided by Velleman. hxxp://www.velleman.be
Perhaps you could order and construct it. It will be a good exercise and you can do some measurements.

Best regards.

That CIRCUIT is not an AM but a FM .. ok ]
try to debug it by
1) see if you did everything ok ,see if you have RF being emitted
this transmitter is supposed to work in FM .. with the help of a FM radio .just scan all the band an see if you notice a hum . or the light of the FM radio comes ON signaling a CARRIER present .. .If a particuliar signal appear in some form of noise .tap the Transmiter to see if that is heard on the radio .. If it does .great
you are in good shape .now your problem is on the MODULATION part ..
This ciruit modulates FM with the help of a VARICAP diode .this is a PARTICULIAR diode .Don't try to replace it with a standard diode because it won't work
this diode changes its CAPACITANCE in function of the voltage provided by the mic amplifier transitor ..

Ok i hope it helps good luck !

geeez :D

I don't anythng about electric & electronic............

I think i need some recommendation for PCB layout system and RF simulation software........... :D

Hi

For the PCB layout, you may try using PROTEUS, or EAGLE software.

Regards

上一篇：Is low-IF good for 802.11 a/b/g?
下一篇：最后一页

project 相关文章：

栏目分类