LAN A200M USING TSMC0.18 TECH
I am designing a LAN @200M with specification of bandwith 70M, NF below 3.5dB and gain more than 35dB by using TSMC 0.18 technology. I don?t know which structure is good for this design? Is here anyone has experience. Any suggestion will be appreciated.
Thanks
Robin
EMAIL: fanbin2000@hotmail.com
u can begin with common source , and then cascode , the main issue that the frequency id low , so ur coil will be off chip if u will use coils
khouly
I am trying it.
good also u can try comon gate amp also
khouly
is TSMC0.18 kit available for Agilent ADS, please post here
is TSMC0.18 kit available for Agilent ADS, please post here
I think you can get the tsmc018 design kit for ads at many website
try local search and google search
are you design LNA?
70MHz @ 200MHz, 3.5dB NF of CMOS technology is really a difficult task in my knowledge
...
Hi.you can find this design kit in this forum
https://www.edaboard.com/viewtopic.p...ht=tscm+rf0+18
Actually, I did design a LNA and mixer work @ 200MHz. The test result is 6dB NF of total front end. I have no idea why. The matching network seems right compared to the simu result. The gain is a little lower. Anyone can give suggestion? appreciate
I think you'd better use the cascode.