Rf thru magnetic materials

Theoretically RF signals will not go thru ideal magnetic material. But in real practice nothing is ideal and part of RF energy may leak. There are a lot of different scenarios, but in general it is hard to get better than 90 dB shielding attenuation.

Best regards

Hello RF_OM,

Thanks for the reply. Another question is I want to secure a handheld device
to a stand using a magnet. Will a magnet cause a problem to the electronic circuitry inside the device.

With regards
P

Hello,

In case of handheld device where you have no fast moving parts, constant magnet should not create problem. In cell phones magnets widely used for having electrical signal of lead opening in clamshell form factor designs. It is probably good idea not to place such magnets close to microphone or speaker, some kind of displays. Also magnet may increase slightly microphonic effects on the board, but it should not be a serious problem.

Best regards

Dear Pankaj
refer to the research papers provide in following link
https://www.edaboard.com/viewtopic.p...017&highlight=
This will clear your doubts
Regards
Abhishekabs