question about inductor simulation in momentum
时间：04-09
整理：3721RD
点击：
Hi all:
I simulate the inductor with PGS in momentum. I found that the inductance value is somehow sensitive to the position of the reference ground(from 3.5nH to 4nH). I use two signal port (internal) and two reference ground (in Metal 1 )associated with them. I want to know if there is some trick when placing the ground port. Thank you very much.
I simulate the inductor with PGS in momentum. I found that the inductance value is somehow sensitive to the position of the reference ground(from 3.5nH to 4nH). I use two signal port (internal) and two reference ground (in Metal 1 )associated with them. I want to know if there is some trick when placing the ground port. Thank you very much.
inductor question momentum 相关文章：
- Distance between air coil inductors
- How is the maximum inductor value in a technology process is determined
- Transmission Line vs Lumped Inductor Choice in Distributed power Amplifier Design
- Why the inductor equation is different in this paper
- Why an input inductor required in all GPS LNA?
- How to realize inductor from transmission line (micro-strip and CPW lines)