Electromagnetic Coupled Patch Antennas
时间：04-08
整理：3721RD
点击：
We need your help.
We are trying to understand the equipment needs of the EMCP designer.
A customer of ours wants to sell a Agilent EMCP system which consists of
E8074A EMCP Probe Control Module (x3)
E8075A EMCP Processor Interposer (x3)
E8078A EMCP Probe Power Supply (x3)
E8077A EMCP Test Assembly
E8076A EMCP Midbus Probe
N4832A Scalable Memory Interconnect
N4833A Auxiliary Control Board
Does this equipment have any value to the 2.4-2.5GHz Coupled Patch Antennas designers?
Thanks for your assistance or direction you may be able to provide to get the right person about this.
:D
We are trying to understand the equipment needs of the EMCP designer.
A customer of ours wants to sell a Agilent EMCP system which consists of
E8074A EMCP Probe Control Module (x3)
E8075A EMCP Processor Interposer (x3)
E8078A EMCP Probe Power Supply (x3)
E8077A EMCP Test Assembly
E8076A EMCP Midbus Probe
N4832A Scalable Memory Interconnect
N4833A Auxiliary Control Board
Does this equipment have any value to the 2.4-2.5GHz Coupled Patch Antennas designers?
Thanks for your assistance or direction you may be able to provide to get the right person about this.
:D
Coupled Electromagnetic Antennas 相关文章：
- design and simulation of cross-coupled VCO using keysight ADS
- [moved] Fully Cross-Coupled Rectifier Configuration in Terms of Transistor Terminals
- Microstrip coupled lines
- Infineon BGT24MTR11 mmic: should RF in/outs be decoupled from ground?
- Coupled line filter design
- Unwanted DC voltage induced on a varactor coupled to DR? (dielectric resonator 10GHz)