how to flush the ground plane with a feed line in hfss?
时间:03-30
整理:3721RD
点击:
which materials do we use for patch and ground plane?
and how to flush the ground plane with a feed line in hfss?
pls help me...m a beginner and need help for the project..
thanx in advance!
and how to flush the ground plane with a feed line in hfss?
pls help me...m a beginner and need help for the project..
thanx in advance!
Hi bruteece,
What do you mean by "flush the ground plane with a feed line in hfss"? As for materials, I try to use whatever material I'm going to make the physical object out of - usually copper.
thanx alot 4 replying!
i mean i wan2 feed the ground and patch with microstrip feed line(and not wid coax probe)...
how shud i proceed?
http://www.emtalk.com/tut_1.htm
- HFSS port 'Port1' does not have a valid reference plane above or below it.
- Re: HFSS port 'Port1' does not have a valid reference plane above or below it.
- E plane and H plane of Patch antenna
- Plane wave sonnet software
- How can I set the plane wave excitation for theta=90 degree, phi=0~180 degrees
- How to set spherical plane wave in ANSYS HFSS?