how to model a ground plane on CST MWS
时间：03-30
整理：3721RD
点击：
I am new to CST MWS. I want to model a ground plane as part of my simulation.
Is it correct that I model a brick with material copper as a ground plane ? also I don't know what should be the height of plane? I know the width and length, but I don't know what should I enter for Z?
Can any one help me with this?
Is it correct that I model a brick with material copper as a ground plane ? also I don't know what should be the height of plane? I know the width and length, but I don't know what should I enter for Z?
Can any one help me with this?
What do you want to simulate? Depending on your application, a brick of copper can be right or wrong .
- HFSS port 'Port1' does not have a valid reference plane above or below it.
- Re: HFSS port 'Port1' does not have a valid reference plane above or below it.
- E plane and H plane of Patch antenna
- Plane wave sonnet software
- How can I set the plane wave excitation for theta=90 degree, phi=0~180 degrees
- How to set spherical plane wave in ANSYS HFSS?