HSPICE问题求助

我安装的是坛子下载的hspice 2011在它自带的demo里面找了一个bjt的仿真的sp文件，我运行了下：
bash$：hspice bjtbeta.sp
结果提示是：

Using: /home/mytools/synopsys/hspice201109/hspice/linux/hspice bjtbeta.sp
****** HSPICE -- F-2011.09-SP1 32-BIT (Nov 18 2011) linux ******
Copyright (C) 2011 Synopsys, Inc. All Rights Reserved.
Unpublished-rights reserved under US copyright laws.
This program is protected by law and is subject to the
terms and conditions of the license agreement from Synopsys.
Use of this program is your acceptance to be bound by the
license agreement. HSPICE is the trademark of Synopsys, Inc.
Input File: bjtbeta.sp
Command line options: bjtbeta.sp
lic:
lic: FLEXlm: v10.8
lic: USER:XXXHOSTNAME: XXX
lic: HOSTID: XXXXXXXXXXXPID:31465
lic: Using FLEXlm license file:
lic: 27000@XXX
lic: Checkout 1 hspice
lic: License/Maintenance for hspice will expire on 31-dec-2019/2019.12
lic: 1(in_use)/9999(total) FLOATING license(s) on SERVER ycp-pc
lic:
Init: read install configuration file: /home/mytools/synopsys/hspice201109/hspice/meta.cfg
1****** HSPICE -- F-2011.09-SP1 32-BIT (Nov 18 2011) linux ******
******
*file:bjtbeta.sp
******bjtmodel parameters tnom=25.000 temp=25.000 *****
************************************************************************
*** bjt model parametersmodel name:0:n1model type:npn***
************************************************************************
namesvaluesunitsnamesvaluesunitsnamesvaluesunits
------------------------------------------------
1*** basic dc parameters ***
level=1.00bf= 100.00br=1.00
brs=0.bulk=gndis=10.00f amps
iss=0.ampsnf=1.00nr=1.00
ns=1.00ibe=0.ampsibc=0.amps
subs=1.00expli=0.amps
2*** low current beta degradation effect parameters ***
isc=0.ampsise=2.00p ampsnc=2.00
ne=2.00
3*** base width modulation parameters ***
vaf=0.voltsvar=0.volts
4*** high current beta degradation effect parameters ***
ikf=20.00m ampsnkf= 500.00mikr=0.amps
5*** parasitic resistor parameters ***
irb=0.ampsrb=0.ohmsrbm=0.ohms
re=0.ohmsrc=0.ohmsrcc=0.ohms
vo=0.voltsgamma=0.
6*** junction capacitor parameters ***
cbcp=0.faradcbep=0.faradccsp=0.farad
cjc=0.faradcje=0.faradcjs=0.farad
fc= 500.00mmjc= 330.00mmje= 330.00m
mjs= 500.00mvjc= 750.00m voltsvje= 750.00m volts
vjs= 750.00m voltsxcjc=1.00qco=0.coul
7*** transit time parameters ***
itf=0.ampsptf=0.deg ktf=0.secs
tr=0.secsvtf=0.xtf=0.
8*** temperature compensation parameters ***
tlev=0.tlevc=0.tre1=0./deg
tre2=0./deg2trb1=0./degtrc1=0./deg
trb2=0./deg2trm1=0./degxtb=0.
trm2=0./deg2xti=3.00cte=0./deg
ctc=0./degcts=0./degtrc2=0./deg2
tref=25.00deg cbex=2.42bexv=1.90
9*** noise parameters ***
kf=0.af=1.00

*****************************************************************
******option summary
******
runlvl= 3bypass= 2
***** job concluded
1****** HSPICE -- F-2011.09-SP1 32-BIT (Nov 18 2011) linux ******
******
*file:bjtbeta.sp
******job statistics summary tnom=25.000 temp=25.000 *****

******Machine Information******
CPU:
model name
: Intel(R) Core(TM) i5 CPU650@ 3.20GHz
cpu MHz
: 1200.000
OS:
Linux version 2.6.32-41-generic-pae (buildd@aatxe) (gcc version 4.4.3 (Ubuntu 4
.4.3-4ubuntu5.1) ) #91-Ubuntu SMP Wed Jun 13 12:00:09 UTC 2012

******HSPICE Threads Information******
Command Line Threads Count :1
Available CPU Count:4
Actual Threads Count:1

******Circuit Statistics******
# nodes=6 # elements=6
# resistors=1 # capacitors =0 # inductors=0
# mutual_inds =0 # vccs=0 # vcvs=0
# cccs=0 # ccvs=0 # volt_srcs=3
# curr_srcs=1 # diodes=0 # bjts=1
# jfets=0 # mosfets=0 # U elements=0
# T elements=0 # W elements =0 # B elements=0
# S elements=0 # P elements =0 # va device=0
# vector_srcs =0

******Runtime Statistics (seconds)******
analysistime# pointstot. iterconv.iter
op point0.0010
dc sweep0.0051164
readin0.01
errchk0.01
setup0.00
output0.00

peak memory used95.55 megabytes
total cpu time0.02 seconds
total elapsed time1.28 seconds
job started at10:16:31 08/16/2012
job endedat10:16:32 08/16/2012

>info:***** hspice job concluded
lic: Release hspice token(s)

最后这个是个什么问题呢。

貌似是我拷贝的东西的问题。
囧