使用ISE13.1烧写XCF04S出现如下错误。

时间：10-02 整理：3721RD 点击：

错误如下，求指导！不胜感激！
INFO:iMPACT - Current time: 2012/9/27 14:52:08
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 10000000.
Validating chain...
Boundary-scan chain validated successfully.
'2': Erasing device...
'2': Erasure completed successfully.
'2': Programming device...
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
write cmdbuffer failed C0000011.
done.
'2': Putting device in ISP mode...done.
'2': Putting device in ISP mode...done.
'2': Verifying device...Failed at address, 0
'2': Verification Terminated
'2': Programming of user selected options failed.
PROGRESS_END - End Operation.
Elapsed time = 11 sec.

上一篇：xilinx XPS里搭个基于AXI的系统但是不用microblaze行不行？
下一篇：verilog 调用Vhdl写的仿真模型

FPGA ASIC quartus Xilinx vivado verilog ALTERA CPLD 集成电路相关文章：

栏目分类