cadance转gerber时这个错，怎么改？谢谢！
时间：10-02
整理：3721RD
点击：
Undefined line width 0.0000
Mirror code NONE
Rotate angle NONE
Offset x: 0.0000
Offset y: 0.0000
Plot negative NO
Suppress unconnected internal pads NO
Draw holes only NO
WARNING: rectangle or unfilled shape composed 0 width line found at (-106.2482 34.6734)
... ignored.
WARNING: 0 width line found at (-106.2482 41.0234)
... ignored.
WARNING: Multiple 0 width lines; all will be treated the same as the first.
... ignored.
WARNING: text composed 0 width line found at (-94.8309 74.3609)
... ignored.
WARNING: text having Multiple 0 width lines; all will be treated the same as the first.
... ignored.
Mirror code NONE
Rotate angle NONE
Offset x: 0.0000
Offset y: 0.0000
Plot negative NO
Suppress unconnected internal pads NO
Draw holes only NO
WARNING: rectangle or unfilled shape composed 0 width line found at (-106.2482 34.6734)
... ignored.
WARNING: 0 width line found at (-106.2482 41.0234)
... ignored.
WARNING: Multiple 0 width lines; all will be treated the same as the first.
... ignored.
WARNING: text composed 0 width line found at (-94.8309 74.3609)
... ignored.
WARNING: text having Multiple 0 width lines; all will be treated the same as the first.
... ignored.
Undefined line width 加具体的值。一般设6mil
都·有设，但还是出错
不管就行了。
我一般都是在 Artwork control form每一层中 Undefind line with :设置 6mil，Shape bounding box :设置 100Mil
将Gerber，中的未定义的线宽改为6或者7mil就好了
这个未定义的线宽在哪改?谢谢！
打开artwork,在这个界面的右边，你就可以看到的
warning不用管
可以不管
虽然可以忽略 但还是想知道怎么修改才能不报错