How to feed a coax cable in hfss?
I am a biginer on hfss, after going throu the tutorials I still don't know how to feed a coaxial cable? And would be good some info on how to model a coaxial cable. I made it from cilinders: outer screen was made from two cilinders substracted one from other, inner conductor from cilinder and everything is filled with teflon.
you can select the cross section of the outer cylinder and define it as a waveport.
hfsss will solve the eigenmode on this 2D waveport and excite your coaxial cable with the solved mode.
Could any one uploud a sample of that. Then it will be clear to me.
Hi Mantas,
you might like to view this:
http://www.ansoft.com/hfworkshop03_b...e_Rouselle.pdf
Cheers,
Element7k
Ok I have some ideas now, but still hard to apply in reality. I am adding the project that I am trying to do. Can somebody modify it and put back here with corect feed. And is my project created good, acording to all rules?
hi
How Can I open the .hfss file? I am using HFSS v.8
thx
I can't convert this project to 8, lower version. Or can I? I am using 9.1v
You can't open v9 with v8. They changed the type of code between the two versions...
In fact, I didn't really understand what you are trying to do... Explain it better! However, here is an exemple of coaxial, I hope it will help you...
Hi aub,
could it be that he is trying to simulate a Coaxial Collinear arrary. If that is the case, I'll flatten out one of the ends and place a waveport at the termination and add a radiation boundary.
Cheers,
Element7k
In fact, I didn't really understand what you are trying to do... Explain it better! However, here is an exemple of coaxial, I hope it will help you...
