微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 微波和射频技术 > 天线设计和射频技术 > How to generate less than 2ns impulse

How to generate less than 2ns impulse

时间:04-10 整理:3721RD 点击:
in TDR system ,they need a less than 2ns impulse ,HOW to generate?

and what frequency/period? Generating 2ns pulse is fairly easy using high-speed logic (ECL).

http://www.holmea.demon.co.uk/Avalanche/Avalanche.htm

Found in a thread in sci.electronics.design

A simple way is : using a delay line ( fabricated delay lines are available from different manufacturers) and use a fast logic circuit for AND the main pulse and delayed pulse.

if peak voltage is small not several ten volt
you can prepair odd number inverters and even number inverters
then take AND
if you use CMOS device for 130nm , the pulse width is around
the
single inverter propagation delay that is 50 pSEC without pad capacitor
nor LOAD capacitor

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top