How to make a S-param simulation with ADS more accurate?
How to make the simulation more accurate? should i involve the pcb trace as microstrip line? Is there any experts made this kind simulation which according well with the measured result?
Wish your reply. Thanks very much.
what is the frequancy range ?
to get the max accuracy , u need to use the Microstrips , even u need to draw the layout and make ADS simulate it EM and cinclude it in schemctic simulation " it is called circuit EM co simulation"
i have used it with good accuracy to 7 GHz PA
khouly
First, Thanks for your reply.
my frequency range is aroud 800Mhz, the simulation with the PA your done is under pcb or other process such as ltcc or cmos? Is the EM sim under ltcc or IC process more accurate than pcb? i do feel that the pcb model very complex and i couldn't put hands in.
by the way,could you send me some info for "circuit EM co simulation in ADS",my email:hto.lee@gmail.com.
Another question:when i doing PA loadpull match, the datasheet provided by ic corp didn't match well with the experiment, is there any convenient way to acheive loadpull matching for certain requirements.
i have used a PCB ,
check the help files of ADS , it contain alot of info ,
the loadpull data , sometimes be different , coz the company , make dempeding of the transistors , if u have a load pull setup it will be great to measure the load pull data in ur lab
khouly
S-Parameters will not take in to account the Non-linearities of a PA!
What is the Power of your PA?
power range mainly concentrate at 10dbm~24dbm,which depends on the tranceiver's. what do you mean by "S-Parameters will not take in to account the Non-linearities of a PA!"? confused.
power range mainly concentrate at 10dbm~24dbm,which depends on the tranceiver's. what do you mean by "S-Parameters will not take in to account the Non-linearities of a PA!"? confused.