how to use waveport as 'multiple ports' in HFSS?
时间：04-09
整理：3721RD
点击：
I want to caculate the impedance of two microstrips side by side,the height of substrate is 1mm,Er=2.55,and width of strip of copper is 2.75mm.So the impedance Zo should be about 50 for one microstrip,but for two microstrips side by side,it is about 26 respectively.
In hfss help,there is a technical note about 'multiple ports' .However,I am in a puzzle about using it.
How should I create the waveport?
one port for both two microstrips or one port for each one respectively?
to use Zpv,Zpi,orZvi?
and how shoud I plot the integrated line ?
In hfss help,there is a technical note about 'multiple ports' .However,I am in a puzzle about using it.
How should I create the waveport?
one port for both two microstrips or one port for each one respectively?
to use Zpv,Zpi,orZvi?
and how shoud I plot the integrated line ?
- Pairing multiple BT/BLE devices to a QCA6174A module
- Active FET mixer with multiple RF input channels, how to avoid DC blocks?
- Using multiple MLIN components on ADS
- transition length should be a multiple of a quarter of a wavelength
- Multiple Access Techniqies
- NF Measurement of Assembly with Multiple Frequency Conversions