final year project - Dielectric resonator circular array
时间：04-08
整理：3721RD
点击：
Hai
kindly plz help me here.
i was being assign to design dielectric resonator circular array which operate at 2.4 Ghz, as my final year project by using CST software
The array consist of 8 element, the problem of my project is that its resonate at 2.4 Ghz, unfortunately the desire gain didn't
compare to the single element the gain is around 5dB
but when implement it on array the gain is much lower than expected, opposite from the function of array, which it supposed to produce higher gain.
anyone can help me plz
TQ
kindly plz help me here.
i was being assign to design dielectric resonator circular array which operate at 2.4 Ghz, as my final year project by using CST software
The array consist of 8 element, the problem of my project is that its resonate at 2.4 Ghz, unfortunately the desire gain didn't
compare to the single element the gain is around 5dB
but when implement it on array the gain is much lower than expected, opposite from the function of array, which it supposed to produce higher gain.
anyone can help me plz
TQ
- Need clarification whether given project is low level or high level transmitter
- Which ham receiver(?) project is well documented and worth building? Any suggestions?
- CST studio Project Designing UHF RFID
- Antenna Project Conductor loop
- Mobile Computation Project
- Doubts about project: Z optimum with load pull and matching to 50 ohms