directivity vs frequency
时间：03-31
整理：3721RD
点击：
Is it possible to plot directivity versus frequency in CST Microwave studio?
If yes then how? :)
Added after 34 minutes:
There's one solution:
to setup "single" farfield monitors at some frequency set and after simulation use Results->Template based postprocessing->1D results->Farfield (broadband)->
but this method requires setting up frequencies manually.. :(
Trying to use "broadband" farfield monitor doesn't help - resulting plot is given only for one frequency set in the plot preferencies of broadband pattern in 2D/3D results.
Another trick is to use macros Farfield->Broadband Farfield monitors, but it results in a whole lot of "single" monitors, which is not so pretty solution... :(
Maybe somebody has another solution?
If yes then how? :)
Added after 34 minutes:
There's one solution:
to setup "single" farfield monitors at some frequency set and after simulation use Results->Template based postprocessing->1D results->Farfield (broadband)->
but this method requires setting up frequencies manually.. :(
Trying to use "broadband" farfield monitor doesn't help - resulting plot is given only for one frequency set in the plot preferencies of broadband pattern in 2D/3D results.
Another trick is to use macros Farfield->Broadband Farfield monitors, but it results in a whole lot of "single" monitors, which is not so pretty solution... :(
Maybe somebody has another solution?
directivity frequency 相关文章：
- [CST] Gain value is more then Directivity..WHy is that?
- Negative Directivity in HFSS.
- how to get gain from directivity ?
- URGENT Help me ///can the directivity be less than 1 in cst mws
- can directivity, gain, and power radiated from antenna be measured by equipment?
- Directivity of Circular parasitic Arrays