how to set groundplane with thickness 1mm in ie3d
时间：03-31
整理：3721RD
点击：
hello i m sameer
i want to ask that how can i set the thickness of ground plane in ie3d. the thickness in the paper is given as 1mm with dimensions but i m not able to set the thickness please somebody help me by step by step procedure.
thank you
i want to ask that how can i set the thickness of ground plane in ie3d. the thickness in the paper is given as 1mm with dimensions but i m not able to set the thickness please somebody help me by step by step procedure.
thank you
In case of horizontally-finite groundplane, you can first define a metal type of 1-mm thickness, then assign the finite groundplane to this metal type. In case of infinite groundplane, there is no way to realize this in IE3D if the groundplane is highly conductive.
groundplane thickness ie3d 相关文章：
- choosing thickness of copper coating when not mentionned inside ieee article
- Thickness of FR-4 substrate
- RF trace thickness from RF module pin to SAM connector - 433Mhz antenna
- relation between microstrip line and board thickness
- RF Pad Trace Thickness
- thickness of the conducting patch and ground plane in MPA