double ridged waveguide
时间：03-30
整理：3721RD
点击：
hi everybody.
I'm designing a wideband (6-18GHz) double ridged horn antenna.
the waveguide that i want to use is WRD650. and it can operate in 6-18GHz.
I used HFSS to design the waveguide , and the S11 was very bad(about -4dB). it means that no wave propagate inside the waveguide. i used PML at the end of waveguide but no changes seen.
my question is "how could excite the waveguide at the beginning and terminate it at the end for proper propagation."
the designed waveguide file with HFSS is attached.
WG.rar
thank you
I'm designing a wideband (6-18GHz) double ridged horn antenna.
the waveguide that i want to use is WRD650. and it can operate in 6-18GHz.
I used HFSS to design the waveguide , and the S11 was very bad(about -4dB). it means that no wave propagate inside the waveguide. i used PML at the end of waveguide but no changes seen.
my question is "how could excite the waveguide at the beginning and terminate it at the end for proper propagation."
the designed waveguide file with HFSS is attached.
WG.rar
thank you
- Employ ridged sections to perform the transition from ridged rect. waveguide to rect.
- Coplanar waveguide - S parameters curves characteristics - HFSS
- Are ideal waveguide port and coaxial feed same in CST?
- Waveguide port creation for microstrip tappered balun
- How to give coplanar waveguide feed to slot antenna
- CST waveguide port setting