微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 微电子和IC设计 > 微电子学习交流 > SOC and Switch verification@新加坡 简历发 hr@hi-talent.com

SOC and Switch verification@新加坡 简历发 hr@hi-talent.com

时间:12-12 整理:3721RD 点击:
SOC and Switch verification@新加坡 简历发 hr@hi-talent.com  
1 SOC and Switch verification
2 Work closely with the USA teams
3 Support chip tape out and bring up
Requirements:
1 5+ years experience in ASIC Verification.
2 BS in Electrical Engineering (or equivalent) is a must have, MSEE is desired.
3 Working knowledge of networking protocols such as 802.3 and TCP/IP
4 Experience with switch engine verification.
5 System on Chip (SOC) Verification Experience, including AHB/AXI, CPU, Interface integration verification.
6 Experience verifying interfaces such as PCIe, Ethernet, DDR and USB.
7 Verification tool experience – Verilog, System-Verilog, Coverage Analysis.
8 Must be familiar with various scripting languages used in verification, including Perl, Csh, Make, etc.
9 Working knowledge of C programming language.
10 Must be expert in Verilog RTL language.
11 Must be familiar with the ASIC verification flow from feature identification to testbench development and through final tapeout sign-off.
12 FPGA emulation experience a plus.
13 Chip bring-up experience, including use of Logic Analyzer and Oscilloscope for debugging
芯片和Switch验证@新加坡 简历发 hr@hi-talent.com    
(请以英文为准)
1芯片和开关验证
2与美国团队紧密合作
3支持芯片带出并提出
要求:
1 5年以上ASIC验证的经验。
电气工程2学士学位(或同等学历)是必须的,硕士是需要的。
如802.3和TCP / IP网络协议3的工作知识
4有开关发动机验证经验。
5片上系统(SOC)的验证经验,包括AHB /AXI、CPU、接口集成验证。
6经验验证接口,如PCIe、以太网和USB,DDR。
7验证工具的经验–Verilog,System Verilog,覆盖分析。
8必须熟悉各种脚本语言用于验证,如Perl、CSH、制作,等。
9编程语言的工作知识。
10必须在Verilog RTL语言专家。
11必须熟悉特征识别测试平台开发的ASIC验证流程,通过最后的流片签字。
12 FPGA仿真经验者优先。
13芯片带来的经验,包括使用逻辑分析仪和示波器进行调试
Best Regards
Jane.Jin 金娟
Principal Consultant & General Manager @ Hi-Talent Consulting Co.,Ltd.
上海芯得企业管理咨询有限公司
上海芯相会企业管理咨询有限公司
Mob:            18502155252
E-Mail:          Jane-Jin@hi-talent.com
微信:       xinde_jane
QQ:             1600548210
Weibo:          http://weibo.com/u/1716864892
website:     www.hi-talent.cn

金总啊,switch是交换机的意思,不是开关

小客户,金总懒得自己动手翻译。

这一看就是新加坡的mtk阿.金总生意做得真大

新加坡mtk上次裁员后从mtk分出来了吧

啊,变成什么了?

不知道  上回裁员了1/3  或者2/3     挺多的    

应该是realtek吧,mtk做的不是soc。

realtek? 牛叉

金总上回是机器翻译的,这次人工润色一下。人家比上次进步了...

我觉得其实没必要翻译。这种英文都看不懂的话,去面试纯粹是浪费时间。金总推荐过去,格调一下子就变的好low。除非是以此为契机集邮?

窝总,我说的是反话。
金总作为一个IC出身的猎头,连一点基本的行业术语都翻译错,难道不low吗?  
金总以为我们做IC的连英语都不会,糊弄孩子一样用机器翻译,难道不low吗?
翻译错了还狡辩,不low吗?

没写待遇,是不是要封

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top