quartus ii 创建sdc文件错误
时间：10-02
整理：3721RD
点击：
首先说一下我的流程，先对整个工程start compilation，然后点击timequest timing analzise创建sdc文件，然后点击create timing netlist,然后写sdc文件，我只写了一句话creat_clock -name sync_clk -period 10.000 -waveform {2.000 8.000} [get_ports clk]然后开始分析错误，Critical Warning: Found minimum pulse width or period violations. See Report Minimum Pulse Width for details.
Critical Warning: Found minimum pulse width or period violations. See Report Minimum Pulse Width for details.
Error: invalid command name "creat_clk"
while executing
"unknown_original creat_clk -name sync_clk -period 8.000 -waveform\{0.200 0.8000\}_col0"
("eval" body line 1)
invoked from within
"eval unknown_original $cmd $args"
(procedure "::unknown" line 7)
invoked from within
"creat_clk -name sync_clk -period 8.000 -waveform{0.200 0.8000}[get_ports clk]"
(file "triple_churning.sdc" line 1)
请教这是什么原因，菜鸟第一次弄sta，求指教
Critical Warning: Found minimum pulse width or period violations. See Report Minimum Pulse Width for details.
Error: invalid command name "creat_clk"
while executing
"unknown_original creat_clk -name sync_clk -period 8.000 -waveform\{0.200 0.8000\}_col0"
("eval" body line 1)
invoked from within
"eval unknown_original $cmd $args"
(procedure "::unknown" line 7)
invoked from within
"creat_clk -name sync_clk -period 8.000 -waveform{0.200 0.8000}[get_ports clk]"
(file "triple_churning.sdc" line 1)
请教这是什么原因，菜鸟第一次弄sta，求指教
有点难度 查PDF文档可能有
小编大哥，貌似命令打错了。create_clock
见笑见笑，平时写clk写习惯了哈哈
创建时钟 命令出错
mingling cuo l e
是命令格式不对，一般为了防止写错我都是直接用的软件提供的命令模版生成的，在Edit-insert里面