求助：conformal不通过
时间：10-02
整理：3721RD
点击：
主要的报告如下：
// Warning: More than 1/3 of the key points have mis-matched names
// Warning: Please use renaming rules if automatic mapping fails to finish
// Warning: Key point mapping is incomplete
// Warning: 174 Black-Box input(s) in Golden have no correspondence(s) in Revised
// Warning: 107 Black-Box input(s) in Revised have no correspondence(s) in Golden
// Warning: 128 Black-Box output(s) in Golden have no correspondence(s) in Revised
// Warning: 158 Black-Box output(s) in Revised have no correspondence(s) in Golden
请问应该怎样修改?是renaming rules 出现的问题吗?
// Warning: More than 1/3 of the key points have mis-matched names
// Warning: Please use renaming rules if automatic mapping fails to finish
// Warning: Key point mapping is incomplete
// Warning: 174 Black-Box input(s) in Golden have no correspondence(s) in Revised
// Warning: 107 Black-Box input(s) in Revised have no correspondence(s) in Golden
// Warning: 128 Black-Box output(s) in Golden have no correspondence(s) in Revised
// Warning: 158 Black-Box output(s) in Revised have no correspondence(s) in Golden
请问应该怎样修改?是renaming rules 出现的问题吗?
没有做验证的前辈吗?
:Q
在setup mode 用report unmapped points
看那些point不能match，才能继续了
还有black box数量很多，有点怪
用 report black box 看一下是否有问题
add black box *** -both 用这个试试
report black box
结果和我设置的一样。三个black box
不过两个是用到的ram,一个是倍频器
应该不是设置black box的问题。这个试过了。问题是设置过之后，为什么报告说black box的引脚都不能匹配。奇怪。
你的综合工具是什么?DC么?
不是，是Synplify。
让pin match