allegro16.5在NC route时报错
时间：10-02
整理：3721RD
点击：
Processing route path data ...
WARNING: No route path data was found for processing.
-------------------------------------------------------------
Processing slot hole data ...
WARNING: Can't find NC Route bit file (ncroutebits.txt)！
Using T01 to route ALL route cuts.
WARNING: No toolcode of a size the same as or smaller than 0.9144 found for an OVAL slot！
Defaulting to T01 as toolname.
在网上搜了下，都是复制来复制去的雷同的答案，并不能解决问题，请问哪位大侠可以指点一二?不胜感激！
WARNING: No route path data was found for processing.
-------------------------------------------------------------
Processing slot hole data ...
WARNING: Can't find NC Route bit file (ncroutebits.txt)！
Using T01 to route ALL route cuts.
WARNING: No toolcode of a size the same as or smaller than 0.9144 found for an OVAL slot！
Defaulting to T01 as toolname.
在网上搜了下，都是复制来复制去的雷同的答案，并不能解决问题，请问哪位大侠可以指点一二?不胜感激！
这种警告不用管，没关系的
嗯，已解决！就是用CAM350看的时候要设置一下。谢谢！
解决就好了
怎么在CAM350上解决的，能详细说一下，我也遇到这个问题了，未解决呢，谢谢
1.在BRD文件所在目录新建一个ncroutebits.txt文件
内容：0.032 T01
2.删除rou文件中开头的；开头的所有行
3.CAM350导入后，Tables-NC Tool Tables，Tool Table选中rou，修改size值，比你的异型孔尺寸稍小就行
学习了，谢谢！
学习了！
mark