出gerber提示drill有警告，请大侠帮忙看看
时间：10-02
整理：3721RD
点击：
================================================================
PROCESSING FILM < DRILL >
TO FILE < D:/laser_total_2circuit_board/v9/laser_total/gerber/DRILL.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 0.2000
Mirror code NONE
Rotate angle NONE
Offset x: 0.0000
Offset y: 0.0000
Plot negative NO
Suppress unconnected internal pads NO
WARNING: 0 width line found at (29.6545 24.8944)
... using undefined line width of 0.2000
WARNING: Multiple 0 width lines; all will be treated the same as the first.
... using undefined line width of 0.2000
WARNING: text composed 0 width line found at (41.0718 77.2311)
... using undefined line width of 0.2000
WARNING: text having Multiple 0 width lines; all will be treated the same as the first.
... using undefined line width of 0.2000
PROCESSING FILM < DRILL >
TO FILE < D:/laser_total_2circuit_board/v9/laser_total/gerber/DRILL.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 0.2000
Mirror code NONE
Rotate angle NONE
Offset x: 0.0000
Offset y: 0.0000
Plot negative NO
Suppress unconnected internal pads NO
WARNING: 0 width line found at (29.6545 24.8944)
... using undefined line width of 0.2000
WARNING: Multiple 0 width lines; all will be treated the same as the first.
... using undefined line width of 0.2000
WARNING: text composed 0 width line found at (41.0718 77.2311)
... using undefined line width of 0.2000
WARNING: text having Multiple 0 width lines; all will be treated the same as the first.
... using undefined line width of 0.2000
一楼是警告信息，发现是生成drill legen的字体及表格线宽没有定义，请问各位在哪可以设置?换了16.5超不习惯，15.5就没有这种警告。在此谢谢了
如图
已经设置了0.2，还出一楼警告，有人碰到过吗?
这个没关系，可以不用管
问题找到了，还是txt字体的问题，如图所示，photo width要设置一个宽度
