求助16.5自动生成bga

刚才用allegro想自动做个bga封装，就是用new/package symbol(wizard)生成，版本为16.5，最后完成的时候一直报错如下
W- (SPMHUT-48): Scaled value has been rounded off.
E- *Error* _axlSaveDesign: too few arguments (at least 4 expected, 3 given) - ("11" nil nil)
W- (SPMHUT-48): Scaled value has been rounded off.
E- *Error* _axlSaveDesign: too few arguments (at least 4 expected, 3 given) - ("11" nil nil)
W- (SPMHUT-48): Scaled value has been rounded off.
E- *Error* _axlSaveDesign: too few arguments (at least 4 expected, 3 given) - ("11" nil nil)
W- (SPMHUT-48): Scaled value has been rounded off.
E- *Error* _axlSaveDesign: too few arguments (at least 4 expected, 3 given) - ("11" nil nil)
请问各位大侠，这到底是怎么回事啊，是软件问题还是设置问题，在线等。

少填了什么内容吧

内容没有少填写，后来解决貌似是因为板框太小，不知道是不是这个原因。

应该是工作区域尺寸不够大吧，建PCB封装一般是没有板框的

恩，反正后来我改大之后就可以了，谢谢您！