生成网表时出错，求解决办法

查看Session log对话框，或看当前目录下的netlist.log文件里面的报错信息。

不小心把session log对话框关了，哪里可以打开?

windows->session log

是这些错误信息  
#280 ERROR(ORCAP-36035): Multiple pin 2's which have different nets connected for R?: SCHEMATIC1, OPA_BUF (292.10, 127.00).
#281 ERROR(ORCAP-36035): Multiple pin 1's which have different nets connected for R?: SCHEMATIC1, OPA_BUF (213.36, 124.46).
#282 ERROR(ORCAP-36035): Multiple pin 2's which have different nets connected for R?: SCHEMATIC1, OPA_BUF (213.36, 124.46).
#283 ERROR(ORCAP-36035): Multiple pin 1's which have different nets connected for R?: SCHEMATIC1, OPA_BUF (195.58, 124.46).
#284 ERROR(ORCAP-36035): Multiple pin 2's which have different nets connected for R?: SCHEMATIC1, OPA_BUF (195.58, 124.46).
#285 ERROR(ORCAP-36035): Multiple pin 1's which have different nets connected for R?: SCHEMATIC1, OPA_BUF (233.68, 124.46).
#286 ERROR(ORCAP-36035): Multiple pin 2's which have different nets connected for R?: SCHEMATIC1, OPA_BUF (233.68, 124.46).
#287 ERROR(ORCAP-36035): Multiple pin 1's which have different nets connected for R?: SCHEMATIC1, OPA_B
UF (248.92, 96.52).
#288 ERROR(ORCAP-36035): Multiple pin 2's which have different nets connected for R?: SCHEMATIC1, OPA_BUF (248.92, 96.52).
#289 ERROR(ORCAP-36018): Aborting Netlisting... Please correct the above errors and retry.
Exiting... "C:\Cadence\SPB_16.6\tools\capture\pstswp.exe" -pst -d "E:\CADENCE\2_SCHEMATIC\MYSCH\MYPROJ.DSN" -n "E:\CADENCE\2_SCHEMATIC\MYSCH\allegro" -c "C:\Cadence\SPB_16.6\tools\capture\allegro.cfg" -v 3   -l 31 -s "" -j "PCB Footprint" -hpath "HPathForCollision"
INFO(ORCAP-32005): *** Done ***

********************************************************************************
*
*  Performing annotation.
*
********************************************************************************
INFO(ORCAP-1379): Done updating part references

********************************************************************************
*
*  Performing annotation.
*
********************************************************************************
ERROR(ORCAP-1376): Cannot perform annotation of heterogeneous part 'N?A(Value NE5532) at location (10.20, 1.70) on page OPA_BUF', part has not been uniquely grouped (using a common User Property with differing Values) or the device designation has not been chosen
INFO(ORCAP-1379): Done updating part references

很多零件还没赋编号

执行了赋予编号的动作，但是执行后还是没有赋予编号成功

这个是复制别人的原理图 后  元件的管脚号掉了

那怎么办

重画

加上去不就行了吗

自己把器件的编号赋一个，重新生成网表就OK了

谢谢兄弟