生成光绘问题================================================================ ...
时间：10-02
整理：3721RD
点击：
出光绘的时候，出现下面的warning，请问，有没有问题，谢谢。如何检查断路?
WARNING: Segment with same start and end points at
(1175.500 1103.598) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(1279.689 1372.358) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(1433.228 1039.689) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(1492.004 1603.701) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(1175.500 1103.598) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(1279.689 1372.358) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(1433.228 1039.689) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(1492.004 1603.701) will be ignored. Increasing output
accuracy may allow segment to be generated.
你輸出的FORMAT是多少?