带圆弧边框出光绘的问题？
时间：10-02
整理：3721RD
点击：
我的外形是不规则的多边形，有非水平或垂直的线段和圆弧组成，现在出gerber时出以下警告。
怎么解决呢?
出警告的地方只有圆弧处。为什么呢?
================================================================
PROCESSING FILM < Etch_TOP >
TO FILE < H:/cadence/PCB/PT1000KBV0.1/Etch_TOP.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 0.6000
Mirror code NONE
Rotate angle NONE
Offset x: 0.0000
Offset y: 0.0000
Plot negative NO
Suppress unconnected internal pads NO
WARNING: Arc segment with end points of
(0.242, 32.227) and (0.035 42.508) converted to a line.
Its center location (1800.494 73.565) is too large for
specified integer accuracy of 3 places.
WARNING: Arc segment with end points of
(2.016, 44.596) and (14.989 44.546) converted to a line.
Its center location (25.999 4547.984) is too large for
specified integer accuracy of 3 places.
WARNING: Arc segment with end points of
(20.008, 44.535) and (32.992 44.535) converted to a line.
Its center location (26.500 4547.982) is too large for
specified integer accuracy of 3 places.
WARNING: Arc segment with end points of
(52.964, 42.508) and (52.758 32.227) converted to a line.
Its center location (-1747.497 73.583) is too large for
specified integer accuracy of 3 places.
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.12700 DARK
CIRCLE 0.30480 DARK
CIRCLE 0.40000 DARK
CIRCLE 0.50800 DARK
CIRCLE 0.55880 DARK
CIRCLE 0.62700 DARK
CIRCLE 1.01600 DARK
RECTANGLE 1.27000 x 1.27000 90.000 NO DARK
RECTANGLE 1.42240 x 0.91440 0.000 NO DARK
OBLONG 2.00000 x 1.00000 0.000 NO DARK
Etch_TOP created with warnings
怎么解决呢?
出警告的地方只有圆弧处。为什么呢?
================================================================
PROCESSING FILM < Etch_TOP >
TO FILE < H:/cadence/PCB/PT1000KBV0.1/Etch_TOP.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 0.6000
Mirror code NONE
Rotate angle NONE
Offset x: 0.0000
Offset y: 0.0000
Plot negative NO
Suppress unconnected internal pads NO
WARNING: Arc segment with end points of
(0.242, 32.227) and (0.035 42.508) converted to a line.
Its center location (1800.494 73.565) is too large for
specified integer accuracy of 3 places.
WARNING: Arc segment with end points of
(2.016, 44.596) and (14.989 44.546) converted to a line.
Its center location (25.999 4547.984) is too large for
specified integer accuracy of 3 places.
WARNING: Arc segment with end points of
(20.008, 44.535) and (32.992 44.535) converted to a line.
Its center location (26.500 4547.982) is too large for
specified integer accuracy of 3 places.
WARNING: Arc segment with end points of
(52.964, 42.508) and (52.758 32.227) converted to a line.
Its center location (-1747.497 73.583) is too large for
specified integer accuracy of 3 places.
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.12700 DARK
CIRCLE 0.30480 DARK
CIRCLE 0.40000 DARK
CIRCLE 0.50800 DARK
CIRCLE 0.55880 DARK
CIRCLE 0.62700 DARK
CIRCLE 1.01600 DARK
RECTANGLE 1.27000 x 1.27000 90.000 NO DARK
RECTANGLE 1.42240 x 0.91440 0.000 NO DARK
OBLONG 2.00000 x 1.00000 0.000 NO DARK
Etch_TOP created with warnings