求助，CAPTURE CIS生成网表导入allegro时出错

我用的是16.2的版本，用CAPTURE CIS生成了网络表，三个文件都产生了，但是导入allegro时就报以下警告，没有错误但是还是导不进元件，这是怎么会事?请高手帮忙解决，谢谢！
#1   WARNING(SPMHNI-192): Device/Symbol check warning detected.
WARNING(SPMHNI-337): Unable to load symbol 'SIP_2P' for device 'ANT920_1_SIP_2P_ANT920': WARNING(SPMHUT-127): Could not find padstack PAD41.
    due to ERROR(SPMHDB-274): Unable to load flash symbol PAD41 (Check PSMPATH setting for this symbol).
#2   WARNING(SPMHNI-192): Device/Symbol check warning detected.
WARNING(SPMHNI-337): Unable to load symbol '0805' for device 'CAP NP_0805_104': WARNING(SPMHUT-127): Could not find padstack PAD14.
    due to ERROR(SPMHDB-274): Unable to load flash symbol PAD14 (Check PSMPATH setting for this symbol).
#3   WARNING(SPMHNI-192): Device/Symbol check warning detected.
WARNING(SPMHNI-337): Unable to load symbol '0805' for device 'CAP NP_0805_472': WARNING(SPMHUT-127): Could not find padstack PAD14.
    due to ERROR(SPMHDB-274): Unable to load flash symbol PAD14 (Check PSMPATH setting for this symbol).
#4   WARNING(SPMHNI-192): Device/Symbol check warning detected.
WARNING(SPMHNI-337): Unable to load symbol '0805' for device 'CAP NP_0805_332': WARNING(SPMHUT-127): Could not find padstack PAD14.
    due to ERROR(SPMHDB-274): Unable to load flash symbol PAD14 (Check PSMPATH setting for this symbol).
#5   WARNING(SPMHNI-192): Device/Symbol check warning detected.
WARNING(SPMHNI-337): Unable to load symbol '0805' for device 'CAP NP_0805_100P': WARNING(SPMHUT-127): Could not find padstack PAD14.
    due to ERROR(SPMHDB-274): Unable to load flash symbol PAD14 (Check PSMPATH setting for this symbol).

你的库里没有相应的pad

检查库，核定设计路径

:):):):)

焊盘路径不对的

我的也老是遇到错

谢谢，我找到错误的地方了，是我这个元件没有对应的封装。

焊盘的问他，热风焊盘找不到