奇怪了，新建的板框导入网表就有这样的提示！

我用另一个老文件导入就没问题，新建一个板框就出问题。高手看看。

#1   ERROR(305) Device/Symbol check error detected.

Unable to load symbol 'USB5PIN_MINI_BOT' for device 'USBCONNB_1_USB5PIN_MINI_BOT_USB': Couldn't find padstack: T_RD37X37D37NP
    due to Unable to load Flash symbol 47.
#2   ERROR(305) Device/Symbol check error detected.
Unable to load symbol 'TF-CARD' for device 'TF_0_TF-CARD_TF': Couldn't find padstack: PAD40CIR40U
    due to Unable to load Flash symbol 70.
#3   ERROR(305) Device/Symbol check error detected.
Unable to load symbol 'HOLD' for device 'HOLD_0_HOLD_HOLD': Couldn't find padstack: PAD36CIR36U
    due to Unable to load Flash symbol 66.
#4   ERROR(305) Device/Symbol check error detected.
Unable to load symbol 'K-4' for device 'K-4_K-4_K-4': Couldn't find padstack: PAD24CIR24D
    due to Unable to load Flash symbol 54.
#5   ERROR(305) Device/Symbol check error detected.
Unable to load symbol 'TSOP_54' for device 'SDRAM-1M-16-4_3_TSOP_54_SDRAM': Couldn't find padstack: PAD2
    due to Unable to load Flash symbol PAD2.

Flash symbol 你可能沒有設定padstack 和 symbol的路徑所以會找不到封裝..

我肯定设好了，set padpath = D:\allegro\ $padpath
set psmpath = D:\allegro\ $psmpath

Flash symbol 要和 part symbol放再同一個路徑下..

回复 tuzhiquan 的帖子
问题解决了没?我也遇到了

这有什么奇怪的,很明显的错误在那里.

我回来迟了点，这个我小得了，就是那个封装里面有个FALSH，那个东西找不到了，

好生学习哈！

小编好像是画插卡音箱的板?