大家进来看看，帮个忙好吗？
时间：10-02
整理：3721RD
点击：
---- Photoplot outline rectangle not found ... using drawing extents
Results from parameter file ...
DEVICE-TYPE GERBER_RS274X
OUTPUT-UNITS INCHES
FILM-SIZE 2400000 1600000
FORMAT 2.5
ABORT-ON-ERROR NO
SCALE 1
SUPPRESS-LEAD-ZEROES YES
SUPPRESS-TRAIL-ZEROES NO
SUPPRESS-EQUAL NO
UNDEF-APT-CONT NO
================================================================
PROCESSING FILM < POWER >
TO FILE < E:/test-layer4/test-layer4/testpcb/POWER.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 6.0
Mirror code NONE
Rotate angle NONE
Offset x: 0.0
Offset y: 0.0
Plot negative YES
Suppress unconnected internal pads NO
ERROR: Layer polarity of class ETCH subclass POWER does not
match film polarity of Negative. DRC may be unreliable.
WARNING: 0 width line found at (0.0 0.0)
... using undefined line width of 6.0
ERROR: aborting film - Shape with first seg=(10.1 10.1) [layer=POWER]
has a void with extents [(5474.7 106.1) (5724.9 256.3)] that touches
another shape with first seg=(10.1 10.1). Manually resolve problem.
ERROR: aborting film - artwork will not be generated！
Error in POWER--halting output. Artwork file not generated.
*** ERROR with POWER
------------------------------------------------------
SUMMARY:
*** ERROR with POWER
ARTWORK Error
Results from parameter file ...
DEVICE-TYPE GERBER_RS274X
OUTPUT-UNITS INCHES
FILM-SIZE 2400000 1600000
FORMAT 2.5
ABORT-ON-ERROR NO
SCALE 1
SUPPRESS-LEAD-ZEROES YES
SUPPRESS-TRAIL-ZEROES NO
SUPPRESS-EQUAL NO
UNDEF-APT-CONT NO
================================================================
PROCESSING FILM < POWER >
TO FILE < E:/test-layer4/test-layer4/testpcb/POWER.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 6.0
Mirror code NONE
Rotate angle NONE
Offset x: 0.0
Offset y: 0.0
Plot negative YES
Suppress unconnected internal pads NO
ERROR: Layer polarity of class ETCH subclass POWER does not
match film polarity of Negative. DRC may be unreliable.
WARNING: 0 width line found at (0.0 0.0)
... using undefined line width of 6.0
ERROR: aborting film - Shape with first seg=(10.1 10.1) [layer=POWER]
has a void with extents [(5474.7 106.1) (5724.9 256.3)] that touches
another shape with first seg=(10.1 10.1). Manually resolve problem.
ERROR: aborting film - artwork will not be generated！
Error in POWER--halting output. Artwork file not generated.
*** ERROR with POWER
------------------------------------------------------
SUMMARY:
*** ERROR with POWER
ARTWORK Error
问题在这里：ERROR: aborting film - Shape with first seg=(10.1 10.1) [layer=POWER]
！ W- A: `. p' C: K1 G. [EDA设计师论坛 has a void with extents [(5474.7 106.1) (5724.9 256.3)] that touches
8 ]6 m- C: {: T4 j$ q5 h w6 XEDA设计师论坛 another shape with first seg=(10.1 10.1). Manually resolve problem.
你看一下是否有挖掉的铜，修一下边试试
你的check动作做完没
我也出现这个问题，找不到原因。
呵呵，解决了
power层有两个bound连接到一起了，去掉一个再重新画上一个应该就可以了，注意两个bound不要连接在一起。