plottin a BUS in ADS
时间：04-12
整理：3721RD
点击：
Hi All!
i don't know if this is the right forum but it is the only one where i see some ADS friends...
here there is my problem:
I designed a digital circuit with for inputs. Actually each of these inputs represents one bit of a 4-bit word.
I would like to plot a diagram of the input word so i merged the four signals in a bus named I<1:4>, but when I try to plot this I signal in the data display using the bus-trace the result is not what i was expecting. I would like to see the classic "bar" with crossings at word value changes and word value displayed inside, let's say in exadecimal format.
Thanks for the help
Leron :P
i don't know if this is the right forum but it is the only one where i see some ADS friends...
here there is my problem:
I designed a digital circuit with for inputs. Actually each of these inputs represents one bit of a 4-bit word.
I would like to plot a diagram of the input word so i merged the four signals in a bus named I<1:4>, but when I try to plot this I signal in the data display using the bus-trace the result is not what i was expecting. I would like to see the classic "bar" with crossings at word value changes and word value displayed inside, let's say in exadecimal format.
Thanks for the help
Leron :P
- Real time plotting of radiation pattern using matlab
- Plotting Imag(Y11+Y12) in Cadence Virtuoso/Spectre
- Plotting total vector current(conduction + displacement) in HFSS
- S parameters plotting with cst
- plotting phase trajectory, evm, acpr
- Mathcad help metamaterial in plotting curve between -ve permeability and frequency