微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 微波和射频技术 > 天线设计和射频技术 > s parameters to z parameters

s parameters to z parameters

时间:04-11 整理:3721RD 点击:
I want the derivation of the formulas to convert S-parameters to Z-parameters.

Try "Microwave engineering" by David M.Pozar, Ch. 4 - microwave networks.

Good luck,
P.

See page 10 of this document:

http://www.herrera.unt.edu.ar/labtel...om1/AN215A.pdf

Spectrum Soft has a nice site on converting S-Parameters

http://www.spectrum-soft.com/news/wi...conv_spar.shtm

Added after 1 minutes:

Agilent also has a some good documentation on this subject.

eesof.tm.agilent.com/docs/iccap2002/ MDLGBOOK/1MEASUREMENTS/3VNA/3SPAR/1SparBasics_1.pdf

Added after 24 seconds:

Agilent also has a some good documentation on this subject.

eesof.tm.agilent.com/docs/iccap2002/ MDLGBOOK/1MEASUREMENTS/3VNA/3SPAR/1SparBasics_1.pdf

in japan, toshiba datasheet is very usefl.
But japanees langage.....

http://www.semicon.toshiba.co.jp/prd...341d1af_32.pdf

上一篇:Radar antenna
下一篇:最后一页

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top