HFSS MODEL
时间：04-11
整理：3721RD
点击：
Hey guys,
I have been trying to simulate (in HFSS) a 7 turn archimedean spiral antenna placed flush to a dielectric(oil). I have also fabricated the exact same antenna and taken measurements. The simulated S11(It is a one port network), does not resemble the measured S11 at all. Can somebody please help me out with this?I have been struggling with this problem with a while now and im very frustrated.I could upload my design if anyone could help me.
Thanks guys
I have been trying to simulate (in HFSS) a 7 turn archimedean spiral antenna placed flush to a dielectric(oil). I have also fabricated the exact same antenna and taken measurements. The simulated S11(It is a one port network), does not resemble the measured S11 at all. Can somebody please help me out with this?I have been struggling with this problem with a while now and im very frustrated.I could upload my design if anyone could help me.
Thanks guys
Pls post the . Then maybe we can help
Added after 54 seconds:
Sorry pls post the was what i was trying to say
If you can upload you model then i can try to help you
BR
Here is the file,it si in version 10,so i dont think it will run in earlier versions.