how to export S-matrix from ADS Momentum

After simulating a 2.5D structure by Adaptive method of ADS Momentum, we can immediately get a plot of S-parameter with adaptive frequency points and interpolating frequency points. When exporting the S-matrix by post processing->visualization..., we can get a s2p file with only adaptive frequency points.

How will we get the S-matrix in the plot with both adaptive frequency points and interpolating frequency points.

Thanks in advance!

If you set up a schematic to simulate your structure, you can achieve s-parameters regarding your s-parameter block variable and then you can export these into another circuit (or simulator)

For instance, put your design into a schematic and do a s-parameter simulation from for example 10MHz to 20GHz by 10MHz step, in that case the simulator will calculate other frequencies between those frequencies and after that you may export this result as touchstone or citi format to use in a different system or simulator..