how to measure size of coaxial feed
时间：04-09
整理：3721RD
点击：
hi..
i need some help in solving this problem. i've design microstrip antenna with narrow slot. the problem is i don't know how to do the coaxial feed as feeding for the antenna. what size of radius that i should used? in the SCT example, it used 4.0mm for the outer radius while inner radius is 1.12mm.. the connector that being used is socket sma panel with 50ohm.
i need some help in solving this problem. i've design microstrip antenna with narrow slot. the problem is i don't know how to do the coaxial feed as feeding for the antenna. what size of radius that i should used? in the SCT example, it used 4.0mm for the outer radius while inner radius is 1.12mm.. the connector that being used is socket sma panel with 50ohm.
- Physical size of antenna in terms of guided wavelenght
- PLL Synthesized radio
- What size components should I use with ATF-55143
- what size end launch SMA would best fit a 1mm FR4 board?
- Calculation domain size for EM simulations - Does a rule of thumb exist?
- How to use Synthesizer PLL ICs with Integrated VCO to make harmonic VCO(6GHz->24Ghz)?