zigbee strain gage
i need help to settle my final year project..
this is a periodontal probe (measuring tooth gum) which utilizes strain gauge to standardize the force applied to patient's gum
my FYP's objective is to make it wireless (from the strain gauge attached to probe)
which wireless device out there is cheapest?
i heard of wireless strain gauge but how much is it?bluetooth better than that?
anyone can recommend some useful journals/websites about wireless and strain gauge? cos my findings is that most site require subscribe.
thank you very much for any help out there..
sincere wish from me to get advice from u all
thanks again
It depends if it's big enough to hold a transmitter, if it will be inserted in place and the patient will close mouth, thus shieding the transmitter.
If a portion of the device remains outside, it's quite easy, use a small transmitter in UHF ISM band with batteries or a SoC that has ADC, programmed for the job. Also zigbee
may be an option.
If it will be inside, i would recomment a passive device with magnetic coupling / near field communication in the style of RFID - at 125kHz or 13.56MHz, using a ferrite core antenna. I observed that magnetic coupling can easily be used from the other side of a few centimeters of tissue and bones, like the palm of a hand.
I would use an ISM band transmitter/receiver pair at 915 MHz with FSK. That is a low enough frequency that data will still transmit out irregardless of if the probe is in your hand or in the patients mouth. It is high enough to get a good antenna that is not too large.
I would try to get the receiving antenna above waist-line, so that things like a big metal dentists chair, do not get in the way of the data link.
You might want it to have at least 4 frequency channels, in case of in-office interference.
grateful for the replies out there..
about the confusion there, actually the probe is about 15cm long and the strain gauge is placed 5cm from the tip of probe.
i'm actually weak at those application of those electronics things..have to study more about all suggestion by guys :D
thanks anyway
anyone can provide further info about transmitter?
It is hard to design this sort of thing if you are not up on the wireless engineering! I would suggest you just buy a turn-key setup, such as at omega engineering:
http://www.omega.com/toc_asp/subsect...subsection=K01