AMPLIFIER - third harmonic output

Hello,

there should be a direct relationship between the input power, the power within the third harmonic of an amplifer and its INPUT or OUTPUT IP3.

Does anybody have a formula ?

What would you say ? How less input power is valid if 40 or 50dBc to the third harmonic is needed.
10dB less than the 1dB compression point.

Which input power is sufficient for 40dB spur free dynamic range when using RF-mixers ?

Thanks

The 3rd harmonic depends by input power, but the level is not predictable in a nonlinear device.
The level of the harmonics vs input power depends by the power class of the amplifier.

The level for third harmonic does not directly related to the IP3 because not only third order distortion contributes to the third order harmonic level. Other orders distortion processes also contribute to the third level harmonic. It practically depends on circuit and its parts non-linearity as well as bandwidth. The best way to determine it is to use measurements.

Input power corresponding to certain SFDR level can be determined from well known equation Pin=SFDR+MDS.

You get harmonics because of nonlinearity.
So there is no direct relation.

Tell me how the system effects due to third harmonics. Is there any calculation please provide me.

Regards,
SRIKANTH