desigining of millimeter waves dtector using microwave offic

help required in accessing the results scematic is providing the same out put for all inputs. im uploading the the file as well as the abstract so one can have a better view of the project

Abstract
The purpose of this project is to design and build an efficient millimetre wave power detector using a schottky diode, at a frequency range of 1 to 10 GHz. The basic aim is to design a matched schottky detector which is sensitive to input power. A low barrier schottky diode is used for improve detector sensitivity.
The schottky detector consists of a schottky diode and a microstrip transmission line. A schottky diode is embedded in microstrip line for power detection, where RF power will be coupled to the schottky diode through a transition from coplanar waveguide to microstrip. In order to achieve maximum power transfer from power source to schottky diode, a transition from coplanar wave guide to microstrip transmission line via smooth impedance transition is required to minimize impedance mismatch at the waveguide-microstrip interface. This matching allows maximum RF power.