CST Microwave Problem - Questioning Error
时间：04-08
整理：3721RD
点击：
Hi,
I have a problem. I am simulating a structure w/ a waveguide port. S11 parameter is linearly higher than 1 when I use open (add) space Boundary condition. Physically not meaningful due to energy conservation.
But, when I use open Boundary Conditions, this time I obtain an error as:
" Inhomogeneous material at open boundary detected. (The structure must be identical in the open boundary plane and the next two mesh steps. ) "
Can anyone help me w/ this problem.
Thanx in advance.
I have a problem. I am simulating a structure w/ a waveguide port. S11 parameter is linearly higher than 1 when I use open (add) space Boundary condition. Physically not meaningful due to energy conservation.
But, when I use open Boundary Conditions, this time I obtain an error as:
" Inhomogeneous material at open boundary detected. (The structure must be identical in the open boundary plane and the next two mesh steps. ) "
Can anyone help me w/ this problem.
Thanx in advance.