multiple-mode resonator
I need information about multiple-mode resonator and stepped impedance resonators to design ultra-wideband filter. Please give me any related information. I need it urgently.
Thanks
Hello
Go through the following article...
Novel Compact Ultra-Wideband Bandpass Filter by Application of Short-Circuited Stubs and Stepped-Impedance-Resonator
Chun-Ping CHEN1, Zhewang MA2 and Tetsuo ANADA1
1 The authors are with Kanagawa University, Yokohama-shi, 221-8686 Japan.
http://ietele.oxfordjournals.org/cgi.../E91-C/11/1786
and
Compact wideband bandpass filter with high performance and harmonic suppression
Shaman, H.N.; Jia-Sheng Hong
Microwave Conference, 2007. European
Volume , Issue , 9-12 Oct. 2007 Page(s):528 - 531
Digital Object Identifier 10.1109/EUMC.2007.4405244
Summary:This paper presents a novel wideband microstrip bandpass filter with low insertion loss and harmonic suppression. The filter is based on a circuit model for an optimum distributed highpass filter consisting of only 3 short-circuited stubs separated by non-redundant connecting lines. In order to reduce the size and to suppress the harmonic passbands of the filter, the uniform connecting lines are replaced by stepped-impedance lines. The design was successfully realized in theory and verified by full-wave EM simulation and the experiment. Theoretical, simulated, and measured results are in excellent agreement. The measurements show low insertion loss of less than 0.5 dB at the center frequency and a flat group delay of less than 0.3 ns over the entire passband.
http://ieeexplore.ieee.org/Xplore/lo...number=4405244
Use AWR Microwave (MWO) & Sonnet to quickly design & validate such resonators/filters...
---manju---
Hi,
can u post me those article?
Thanks
Hello kpcheah,
Here is another one you can download from the web....
Designing Low Cost Wideband Microstrip Bandpass Filters using MWO
http://www.eng.jcu.edu.au/Staff/Prof...128981-Fil.pdf
provide me your email ID, then I will send the requested articles as attachment....
---manju---
Hi,
my email is kpcheah@edaboard.com
Thanks
Hello,
I sent these files to both the email IDs kpcheah@gmail.com and
kpcheah@edaboard.com
---manju---
Hello Friend,
Can you please send me these articals as well. engr.sohailkhalid(at)gmail.com.
thanks
- Pairing multiple BT/BLE devices to a QCA6174A module
- Active FET mixer with multiple RF input channels, how to avoid DC blocks?
- Using multiple MLIN components on ADS
- transition length should be a multiple of a quarter of a wavelength
- Multiple Access Techniqies
- NF Measurement of Assembly with Multiple Frequency Conversions
