How to plot Q-factor of RMSA Vs. Substrate height and patch width
时间：04-07
整理：3721RD
点击：
Hello guys,
I needed help, i want to plot the relation between Q-factor and substrate height, h, and patch width, W, for the RMSA design.
Because, i have used "Lowering Q-factor" technique to increase the bandwidth of conventional RMSA. I have achieved this by increasing the h and W.
But i want to know which value of Q-factor is the optimum value for BW enhancement from the plot. So, pls someone tell me how to plot this graph.
Many thanks,
Abiy
I needed help, i want to plot the relation between Q-factor and substrate height, h, and patch width, W, for the RMSA design.
Because, i have used "Lowering Q-factor" technique to increase the bandwidth of conventional RMSA. I have achieved this by increasing the h and W.
But i want to know which value of Q-factor is the optimum value for BW enhancement from the plot. So, pls someone tell me how to plot this graph.
Many thanks,
Abiy
- Antenna design with 'Air Substrate'
- Ceramic or High K PTFE Substrate
- How to mount RF substrate into a Al housing for making an RF module
- best MS substrate to use in a wireless energy harvesting (rectenna)
- Substrate to substrate interconnect between two CPW substrates
- How to choose the substrate's thickness for a 9.35Ghz application