PCB antenna design book

I want to have the same kind of books. Could anyone offer some? Thanks.

1. Advances in Microstrip and printed antennas -- Kai Fong Lee & Wei Chen
2. Broadband Microstrip Antennas -- Girish Kumar & K. P. Ray

https://www.edaboard.com/viewtopic.p...ght=microstrip

3. Compact and Broadband Microstrip Antennas -- Kin-Lu Wong

https://www.edaboard.com/viewtopic.p...ght=microstrip

4. Planar Antennas for wireless communications -- Kin-Lu Wong

I guess you can find all these book in the book upload/download fourm.

https://www.edaboard.com/forum68.html

regards,
shameemkabir

fogot another one:

https://www.edaboard.com/viewtopic.p...ght=microstrip

check this

https://www.edaboard.com/viewtopic.p...604&highlight=

thanks for the list..........

To shameemkabir,

The second book has a lot damaged pages. May be you know another link?

I am uploading the second book (2. Broadband Microstrip Antennas -- Girish Kumar & K. P. Ray) here.

regards,
shameemkabir

Thanks a lot for this book. Now it is good.

Is there is any book for PIFA or FICA except Planar Antennas for wirelessc ommunication and Compact Broad Band Microstrip Patch Antenna by Kin-Lu-Wong.

awww...Thanks alot !
:D

Hi!

This link does not exist and searching does not give any success :(
Any advice?

BR,
Ergo

Hi,
I'm currently designing a UWB patch antenna using CST MWS. I got all the results i want such as S11,radiation pattern etc. The line impedance of my antenna also got 50 ohms. But what is confusing me is the smith chart not all 50 ohms at my desired frequency (3.1 - 10.6 GHz). Is smith chart still important since i already got 50 ohms at line impedance? And what would happen to the fabricated antenna if the smith chart not 50 ohms?

Hi,

i'm doing a square microstrip antenna, but i dont how to do the ground plane, i mean, i′m not sure if ground plane must have a specify size. Or must have the same size of the square!

Thanks!

Best regards!

Added after 37 minutes:

the square dimensions are 27mm x 27mm and i used a quarter-wave length with 13.86mm x 0.085mm!

Your prblm is not clear...... do you want to design the antenna in simulator or want to fabricate it.

ur links r dead....and i din find any files....pls upload if possible...thanks

hi at first define u antenna frequency and upload u antenna pic or simulation file. The ground size related to u design and u aim that u want achieve but should have ground and it impossible with out ground