How to get underpass and over pass for MSIND and MSSPLR_MDS in Agilent ADS

Dear Sir,
I have connected printed microstrip spiral inductor MSIND or MSSPLR_MDS to microwave circuit. How to get under pass and over pass for MSIND and MSSPLR_MDS in ADS. I want to generate the layout for this connected MSIND or MSSPLR_MDS ,later to get the fabrication. Can you help me anybody.

Dear Sir,
Please help me some one.

Choose a proper 2 metal layers substrate ( or create) and assign the metal layers onto it..

Dear Sir,
Is it sufficient by choosing the 2 metal layer substrate and assign the metal onto it for getting generation of overpass and underpass spiral inductor.

Should be..
2 Metal layer will give you at least 3 dielectric layer including air/space.If you choose first metal layer for spiral, you can use second metal layer for overpass or vice versa..
If you choose the first metal layer for underpass, second layer will be for spiral.If you organize dielectric layers, you can obtain your spiral inductor with proper dielectri and metalic layers.

BigBoss Sir,
Thank you for your kind help. I will try as you said.