微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 微波和射频技术 > 天线设计和射频技术 > Want to transmit GPS data using radio transmitter?

Want to transmit GPS data using radio transmitter?

时间:04-04 整理:3721RD 点击:
i am looking for a design solution in which i receive a GPS data and want to transmit
it using radio transmitter.

Hi,

What is your question? Hardware? Software? Complete solution?

Did you do any research on your own?

A possible solution:
There are many GPS modules communicating with UART.
There are many Bluetooth-to-UART modules.

Connect both any our are finished.

Klaus

It will be like.
Satellites-> GPS Tracker(Tx/Rx)-> radio receiver-> radio transmit-> Network(World wide web etc)

The tracker is able to determine the precise location by receiving position signals from GPS satellites with its GPS receiver. The tracker then uses radio transmitter to transmit its position to a network. The network can be either ground or satellite-based.

I am looking for a hardware module which has a GPS tracker and radio receiver on a same board.

Hi,

thats′s exactely what the GPS trackers do, you can buy on ebay for example..

Klaus

what's your definition of precise ?
Publically available precision is around 10 - 15 metres where only one receiver is used



indeed or as example, this one .....
http://www.jaycar.com.au/gps-gsm-tra...evice/p/LA9011


Dave

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top