HOW to chose coaxial cable and connector for prob feed patch antenna at 5.8ghz
i need you help so much
i want to fabricate patch antenna at 5.8ghz with prob feed and i don't know how i can chose th suitable coaxial cable and connector?
Well, you can either use a SMA connector at the antenna feed point or a ufl connector. And you can choose a coacial cable with Zc= 50 Ohms.
Thanks for your reply
I want know exactly type and reference of cable and sma connector at 5.8ghz for prob feeding patch antenna
Thanks for your reply
I want know exactly wich type and reference of coaxial cable and connector coaxial the most suitable for prob feed of printed patch antenna at 5.8ghz
As said, SMA connectors are very popular and easily available up to 26GHz.in order to measure an antenna with a great accuracy, especially cable should be high quality one ( high screening factor)and also SMA connector shouldn't be "any" brand.There are many well reputed companies such as Huber-Suhner,Pasternack,Rosenberger etc.
It all depends on your budget. Samtec in my opinion has the best performance over Amphenol, Cinch, Hirose, Linx Technologies, Molex, Radiall, Rosenberger, TE Connectivity,. If budget is an issue go for Huber-Suhner. Try filtering it down in mouser or digikey.
Thanks so much for your reply
Can you help me to chosr the most suitable and low cost
Can you chose me please the mosy suitable coaxial cable and coaxial connector for prob feed of microstrip patch antenna at 5.8ghz
SMA: https://www.digikey.com/product-deta...173-ND/3522339