微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 微波和射频技术 > 电磁仿真讨论 > exponential taper

exponential taper

时间:03-31 整理:3721RD 点击:
Hi all,

I'm currently designing Vivaldi antenna at 2.4GHz. The thing is I have a problem in drawing its exponential taper in CST. currently I drew the taper by using the blend edges function, but I think the taper rate is not according to the required taper rate. Does anyone knows how to draw it?

Thanks in advance for your help.

u have the formula of shape profie, using matleab calculate Raduis and axial length table data, keep in notepad ,and feed diectly in CST , option is there to load such files and sweep 360 degree

The easier way is to do like this
In Manu Bar

Macors->Curve->Creat 2D curve analytically (xy-UV)

Hi snkhan,

i tried to do the curve as how u said..
the problem is, the opening rate of the taper profile cannot be set to what my antenna required is or the curve would be going on to either right or left not up...how can I fix this? or if anyone else who design vivaldi antenna can help me? perhaps we can discuss about it, thank you.

As kecbackbencher suggested, use matlab to draw it. take a look at this post:

https://www.edaboard.com/viewtopic.p...492&highlight=

you can draw a line/curve using equation in Matlab and save that two column matrix as a text file. Then in CST, Curves > New curve and select Spline. Press Esc to have a window where you can import the .txt file. Select the .txt file and press OK. That's the curve you are looking for.

ok, i'll try to do it..

thank you very much for your help :)

上一篇:Urgent Help needed.
下一篇:最后一页

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top